Final Update next week

After a long drawn out sale proceedure I should have some news next week, Concerning the new ownership of the "Strathspey" , plus some news on what I shall be doing myself.

I will also be willing to pass on this blog to the new owner if he would like it.

Fine Views

Forward compartment looking aft

Inside the Wheelhouse

From the aft cabin looking forward

Westerbeke Generator/ Kabola Boiler

I bought this a while ago, it is a Kabola oil fired pressure jet marine central heating boiler for hot water and radiators , and they are as rare as hens teeth seconhand but the best boiler you can buy for a large boat like the Strathspey. Much more economical than a traditional drip feed boiler such as the Reflex or Kabola drip fed units, also they are fully programable like a home system.

I have been having a bit of a fiddle with the Westerbeke marine generator fitting new anodes drive belts and cleaning the scale out of the heat exchanger,this is a superb piece of equipment with a Mitsubishi four cylinder diesel 2 ltr . coupled to a 9.5 kva 240/110 v ac generator
These generators are about £9500 new and run forever at 1500 rpm very quitely , forget your chinese e-bay generators which last about five hours.
I have two of these ,this one which runs perfectly and a second one that is in pieces due to an ingress of water and it needs new pistons although the engine has ony done about 200 hrs.

Starting to look much smarter

Another old Photo

Here are another couple of old photo's of the Strathspey . The top one is from approx the early 90's when she was the Shimanda , and the second is another one of her in 69.

Another Door

Another door in the process of being fitted , I find fitting these doors a very slow operation and I am sure a proper carpenter could do one of these in about an hour . But I have a fear of making a mess of it, so it takes me about three hours .

WORK CONTINUES

Although the Strathspey is now up for sale , I have not lost interest in the project and shall still continue working on all the cabin structures .

Even though my long term plans have changed I still get a lot of pleasure from seeing all the sections coming together, and wood is a very nice medium to work with.

STRATHSPEY TO BE SOLD

I have had to come to the difficult decision that I shall have to sell my much loved "Strathspey".
I have realised after over two years of work ,that I am spreading myself to thin with work , our home in Italy and England plus commitment to my family who understandably have no interest in my project. I have just spent five days in Scotland with the old girl and feel very very sad about this decision . I will still be carrying on with the work until she is sold ,also work will continue in Scotland with finishing the deck plus other jobs.
She is a fine vessel and a rare one being built in 1969 one of the last remaining Scottish boats to still exist in her original form. Mechanically she is in fantastic shape having had her engine gearbox and sterngear replaced about seven years ago . I have had the engine serviced every year and the engine is run two to three times every week. The hull is strong and dry with massive frames and hull planking and in very good condition.( built to withstand extreme conditions )
This is a very hard decision to make but necessary for me.
She will be available as a project to include all the interior sections ( see contents of this blog)all ready made for assembly into the hold ,plus extra timber and some fittings ,drawings and scale model of the cabin layout ( which is all adaptable )
Also included is the diesel anchor winch with chain and two large anchors suitable for ground tackle . In the wheelhouse is a good foruno radar , colour sounder , Necco marine autopilot and loran gps. There is a second radar but this has a fault with the magnatron. She is also seaworthy
and comes with harbour dues paid up till April 2009.She is due to be placed on the houseboat web site.

NEW NAVIGATION LIGHT BOARDS

As well as doing all the normal home stuff like cutting the grass and helping my son repair the brake balance valve on his Renault Clio. I have also been busy this weekend making new navigation light boards ,here you can see them in grey primer, in a few days they should be black and ready to take up to Scotland to fit them to the wheelhouse . These are exact copies (apart from not being rotten) of the one you can see in the other photo. These look huge off the boat but quite modest on the wheelhouse roof.

Before and After

View from the Harbour Wall

Here is a very recent photo of the Strathspey courtesy of Calum MacBain . With the freshly painted wheelhouse and whaleback , so after a lot of hard work by Ian and his team of fisherman the old girl is starting to look much much better.

Fishroom two years ago

This is a photo taken before work started two years ago

Fish Room

Here is a new photo of the old "Fish Room" taken a few days ago courtesy of Kevin Munro who is a fisherman and moderator for the web site "trawlerphotos.co.uk"
The whole of the deckhead has been stripped of layers of rust and the whole lot painted with anti rust paint and lots of bathroom gloss paint which is anti fungal.
All the frames and hull planks have been treated with timber preservative. If you look at some of the very early photo's you will see what a vast difference there is .

ONE DOWN EIGHT TO GO

I spent most of Saturday finishing this first section of cabin wall and door , The door I made up during the week and fitted the hardware and three coats of varnish this weekend . So now that I have practised on this one the others should go a bit quicker !!

BUSY IN MY NEW WORKSHOP

You may have noticed that not much has been happening lately .For one reason I have been away in Italy for a couple of weeks ,which has been nice and relaxing and at least I have had a bit of real summer weather .

Also although plenty has been going on up in Scotland where Ian is organising all the gradual refurbishment work aboard the Strathspey he does not have a digital camera .So any new photos will have to wait until I pay a visit later this summer.

I have been busy in my new workshop though, making cabin doors which are for me the more technically difficult bits of woodwork with lots of mortice joints and rebates .

THE STRATHSPEY WORKSHOP

At the moment quite a lot has been happening on board the Strathspey ,the Deck has been sealed and painted ,the Whaleback has been Stripped and re-painted and the Wheelhouse and deckhouse has been painted in Bamboo and white. Also the deckhead in the hold and forward compartment has been painted in gloss white .
No photo's at the moment as digital camera's seem to be in short supply in the Highlands at the moment.

But I do have some pictures of the new 18 x10 ft Strathspey workshop in my garden ,so full steam ahead on the interior.As at last I have somewhere to use all my tools under one roof !!

Cabin Style

This is a photo of the look I would like in the Strathspey ,one thing I want to avoid is to much wood as this can be a bit oppressive .So I am going for cream with mahogany cabin doors and trim,I feel this will give a cosy and quite light traditional feel.
I am not a great fan of pine in boats ,so all the panelling will be painted.

New Workshop

For most middle aged men a new shed is a very exciting prospect , and so with great excitment this manky damp old shed is comimg down and this part of our front garden is being cleared to make way for my new good sized sensibly priced workshop where I can put all the woodworking machinery I have collected from ebay for building all the interiors on the Strathspey . And all at the suggestion of my wife !!!!

What more could a man want

ORCADES

This is the Strathspey in 1969 when she was the "Orcades BCK.67". She is brand spanking new in this photo ,and maybe one day she could look almost this good again.
It's good to have a target !!!

Strathspey last Spring

Her she is this time last year